Toshiba TEC B-SX4T Series Maintenance Manual page 150

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33012B
(Revision Date Apr. 24, 2008)
4.22 RFID MODULE (B-SX704-RFID-U2-EU-R)
9. Open the Print Head Block and lock it with the Latch.
Latch
Print Head Block
10. Push the Hook through the rectangle hole with a jeweler's screw driver or something, and remove the
Platen Holder Cover in the direction indicated by the arrow.
Platen Holder Cover
Hook
2
1
Push
11. Lift the right side of the Strip Plate, and then pull and remove it.
2
1
Strip Plate
4-133
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es