Attaching The Rfid Module - Toshiba TEC B-SX4T Series Maintenance Manual

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

4.11.5 Attaching the RFID Module

1) Raise the Print Head Block, and slide the Antenna Frame into the printer as shown below. Let the
protruding screw of the printer pass through the slit of the Antenna Frame.
2) Secure the Antenna Frame with the three screws removed in Step 10 of Section 3.1.
SMW-4x8 Screw
3) Mount the Antenna Cover containing the Antenna on the inside of the Antenna Frame.
Be sure to fit the locating pins of the Antenna Cover into the oval holes and the cuts in the Antenna
Frame.
Oval Hole
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
Antenna Frame
Locating Pin
Antenna Cover including Antenna
Antenna Frame
4-63
4.11 RFID MODULE (B-9704-RFID-H1-QM/QM-R)
Screw
Slit
SMW-3x6 Screw
Locating Pin
Cut
EO18-33012B