Toshiba TEC B-SX4T Series Maintenance Manual page 74

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
Cable Clamp
SMW-3x6 Double Sems Screw
Interface Cable
Spacer
NOTE:
To install the B-9704-RFID-H1-QM in the printer, TAGSYS RFID Module MEDIO
antenna are required separately. Before installation, solder the supplied Interface Cable to the RFID
module as shown in the picture below, and attach the RFID Module and the Antenna to the RFID Plate and
the Antenna Cover, respectively.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
Parts
Interface Cable
Quantity
RFID Plate
1 pc.
PT-3x6 P-TITE Screw
7 pcs.
SMW-2x10 Double Sems Screw
1 pc.
Nylon Washer
2 pcs.
RFID Module
4-57
4.11 RFID MODULE (B-9704-RFID-H1-QM)
Parts
TM
S002 and the exclusive
Antenna
EO18-33012B
Quantity
1 pc.
1 pc.
2 pcs.
2 pcs.