Toshiba TEC B-SX4T Series Maintenance Manual page 169

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
2） Start the printer in the system mode and perform a read test to measure the AGC value.
To measure the AGC value, place only one RFID tag on the Antenna.
Example
RFID Tag
Turn the printer on while holding down the
[FEED] and [PAUSE] keys at the same time.
<1>DIAG.
[RESTART]
<10>RFID
[PAUSE]
<10>RFID
Q VALUE
[PAUSE]
<10>RFID
WT AGC
Turn the power off.
Turn the printer on while holding down the
[FEED] and [PAUSE] keys at the same time.
<1>DIAG.
[RESTART]
<10>RFID
[PAUSE]
<10>RFID
READ TEST
[FEED] or [RESTAT]
Continued to the next page.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
V4.5
When "<1>DIAG. V4.5" is displayed, press the [RESTART] key.
When "<10>RFID" is displayed, press the [PAUSE] key until the Q value setting menu is
displayed.
Choose "2" with the [FEED] or [RESTART] key.
2
Press the [PAUSE] key and turn off the printer.
0
V4.5
When "<1>DIAG. V4.5" is displayed, press the [RESTART] key.
When "<10>RFID" is displayed, press the [PAUSE] key.
Read test menu is displayed.
OFF
Press the [FEED] or [RESTAT] key to choose "READ TEST ON".
4.22 RFID MODULE (B-SX704-RFID-U2-EU-R)
4-152
EO18-33012B
(Revision Date Apr. 24, 2008)