Toshiba TEC B-SX4T Series Maintenance Manual page 207

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33012B
(Revision Date Feb. 6, 2009)
4.24 RFID MODULE (B-SX704-RFID-U2-US-R)
14. Remove the Platen Frame Top from the printer.
Platen Frame Top
15 Remove the four screws from the side of the Print Head Block, slightly pull the Head Side Plate, and
remove the two Ribbon Guide Shafts.
Head Side Plate
SMW-4x8 Screw
SMW-3x6 Screw
SMW-2.6x6 Screw Ribbon Guide Shaft
NOTE: One of the removed Ribbon Guide Shafts and SMW-2.6x6 Screws are re-used when attaching the
Ribbon Guide. Keep the unused ones for future use.
16. Insert one of the Ribbon Guide Shafts removed in Step 15 into the Ribbon Guide.
Ribbon Guide
Ribbon Guide Shaft
4-190
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es