Toshiba TEC B-SX4T Series Maintenance Manual page 53

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
Be careful not to injure your fingers when installing the cutter unit.
When attaching the B-8204-QM cutter module, replace the original cutter paper guide C with the
enclosed B-SX cutter paper guide C using the following procedure.
CAUTION!
Do not hold the cutter paper guides when attaching the Cutter Unit to the printer. Doing so may
deform the cutter paper guides, causing a paper jam.
(1) Remove the two M-4x6 Set Screws from the cutter unit to detach the cutter paper guide C.
Cutter Paper Guide C
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
Cutter Blade
NG
4.9 RIBBON SAVING MODULE AND ROTARY CUTTER (For B-SX4T Series)
WARNING!
M-4x6
4- 36
EO18-33012B
Cutter Paper Guide