Toshiba TEC B-SX4T Series Maintenance Manual page 47

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33012B
4.7 LAN INTERFACE BOARD (B-9700-LAN-QM)
1) Loosen the two M-3x5 screws of the LAN interface board. (Refer to Caution above.)
2) Remove the side panel (L) from the printer. (Refer to section 3.2.)
3) Remove the two SM-3x6 screws to remove the blind plate A from the back.
Blind Plate A
SM-3x6 Screw
NOTE: Keep the blind plate A safe as this will be necessary when the machine is modified to the standard
type.
4) If the PCMCIA interface board is also installed, attach the PCB attachment plate to the plate to
which the PCMCIA interface board is secured with the SM-3x6 screw. If not, go to the next step.
PCB Attachment Plate SM-3x6 Screw
PCMCIA Interface Board
4-30
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es