Toshiba TEC B-SX4T Series Maintenance Manual page 174

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
2. Remove the backing tapes from the reverse side of the Shield Sheet and attach it to the Antenna
Cover, as shown below.
Shield Sheet
3. Attach the Antenna Plate L and Antenna Plate R to the Antenna with the P-3x6 screws.
P-3x6 Screw
4. Refer to Section 4.23.3.2 and install an RFID module in the printer.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
Antenna
Cover
Tape
Antenna Plate L
Antenna (with Antenna Plate)
Antenna Plate R
4-157
(Revision Date Jul. 15, 2008)
4.23 RFID MODULE (B-SX704-RFID-U2-AU-R)
Shield Sheet
P-3x6 Screw
EO18-33012B