Toshiba TEC B-SX4T Series Maintenance Manual page 190

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
6. Connect the RFID Module to CN14 on the Main PC Board with the Interface Cable.
Connector CN14
Main PC Board
Interface Cable
7. Re-install the Platen, Platen Holder, Strip Plate, and Platen Holder Cover in the reverse order of
removal.
Platen
Strip Plate
8. Re-install the Front Plate and Side Cover (L) in the reverse order of removal. Do not forget to connect
the Fan Motor Cable to CN19 on the Main PC Board. Be careful not to catch any cables in the Side
Cover (L).
Side Cover (L)
9. Installing the RFID kit in the printer is now completed. Then, go to Section 4.23.4 and configure the
RFID module settings.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
Front Plate
4.23 RFID MODULE (B-SX704-RFID-U2-AU-R)
4-173
EO18-33012B
(Revision Date Jul. 15, 2008)
Connector
RFID Module
Platen Holder Cover
Platen Holder