Toshiba TEC B-SX4T Series Maintenance Manual page 45

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
10) Attach the blind plate A to the rear plate. If the PCMCIA interface board has been installed,
go to the next step.
Rear Plate
SM-3x6 Screw
NOTE: In case that the PCMCIA interface board has been installed, retain the blind plate A.
11) Reassemble the side panel (L) to the printer in the reverse order of removal.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
4.6 USB INTERFACE BOARD (B-9700-USB-QM)
Blind Plate A
4-28
EO18-33012B