Toshiba TEC B-SX4T Series Maintenance Manual page 86

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
3) Remove the four B-4x5 screws from the side panel (L).
4) Open the top cover and remove the three P-4x8 screws that secure the side panel (L).
5) Lift the side panel (L) and put it aside.
6) Disconnect the fan motor harness from CN19 on the Main PC board, and then separate the side
panel (L).
Side Panel (L)
7) Turn the head lever clockwise to Free position.
8) Open the ribbon shaft holder plate.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
B-4x5 Screw
B-4x5 Screw
Fan Motor
Head Lever
Lock position
(Label)
Lock position
(Tag)
Side Panel (L)
CN19
Main PC Board
Ribbon Shaft Holder Plate
4-69
EO18-33012B
4.12 SWING CUTTER (B-4205-QM-R)
Top Cover
P-4x8 Screw
Fan Motor Harness