Attaching The Rfid Module - Toshiba TEC B-SX4T Series Maintenance Manual

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

4.10.5 Attaching the RFID Module

1) Attach the Cable Clamp to and fit the Bush into the positions shown in the picture below.
2) Pass the Antenna Cable through the Bush, and fix the cable with the Cable Clamp
Cable
Clamp
Bush
3) Attach the RFID Module to the RFID Attachment Plate A and the RFID Attachment Plate B with
the three SMW-3x6 screws
NOTE: Care should be taken not to catch the cables between the RFID Module and the RFID Attachment
Plate A.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
RFID Attachment Plate B
RFID Attachment Plate A
RFID Module
4.10 RFID MODULE (B-9704-RFID-U1-US/EU/EU-R)
SMW-3x6 Screw
RFID Module
4-51
EO18-33012B
(Revision Date: Feb. 15, 2007)
Cable
Clamp
Bush
Antenna
Cable
SMW-3x6 Screw
Cable
RFID Attachment Plate A