Pepperl+Fuchs IDENTControl IC-KP2-2HB18-2V1 Manual page 70

IC-KP2-2HB18-2V1
Commands
Single write configuration (SC --> 12h)
Master -> Slave
Address
CH1
RWw n
RWw n+1
RWw n+2
RWw n+3
Slave -> Master
Address
CH1
RWr n
RWr n+1
n:
*:
The R/W head makes exactly one attempt to write a word to the configuration
range ("Protection Word" or "Control Word") from the address <ConfAddr>.
The password mode must be active so that the R/W head can write to the
configuration range.
If the password mode is deactivated, every data word outside of the write-
protected range can be written to. If you would like to modify the write-protected
range, you must modify the "Protection Word" accordingly.
Enhanced buffered write configuration (EC --> 66h)
Master -> Slave
Address
CH1
RWw n
RWw n+1
RWw n+2
RWw n+3
70
Bit no.
CH2* 15
RWw n+8
RWw n+9 <ConfAddr>
RWw n+A <Write data> byte 2
RWw n+B <Write data> byte 0
Bit no.
CH2* 15
RWr n+8 <WordNum>
RWr n+9 <ReplyCounter>
Address in master module, specified by the assignment of the stations
2 channel mode
Bit no.
CH2* 15
RWw n+8
RWw n+9 <ConfAddr>
RWw n+A <Write data> byte 2
RWw n+B <Write data> byte 0
8 7
0 0 0 1 0 0
-
<Write data> byte 3
<Write data> byte 1
8 7
0 0 0 1 0 0
<Status>
8 7
0 1 1 0 0 1
-
<Write data> byte 3
<Write data> byte 1
0
1 0
0
1 0
0
1 0