Device Family; Allocation To The Std_P Device Family - Festo FB16 Electronic Manual

VIFB16 - 03/05
4-26
4. Commissioning
When you have correctly selected the field bus
address,
•
press the ENTER key or
•
double click on the line shown in grey.
This will open the screen for the selection of the

device family.

Allocation to the STD_P device family

In the screen for selecting the device family, the
valve terminal must be allocated to the STD_P
device family.
PLEASE NOTE
• When used with XTEL V52 the STD_P
device family is available only if the "disk
TXT R CTG V5.2 catalog" has first been
installed.
• When used with XTEL from V53 or V6 the
STD_P device family can be accessed
directly, without installing additional software.
•
Select the STD_P device family for the valve
terminal.
•
press the ENTER key.
The screen for configuring the STD_P device
family will then appear.
0506b