Festo FB16 Electronic Manual page 41

VIFB16 - 03/05
1
M6
M10
Fig. 2/6: Wall fitting of an ISO valve terminal type 05
0506b
2. Fitting
Fasten the terminal as follows:
•
Use 3 screws M10 on the adapter plate and
the right-hand end plate (2)
•
2 screws M6 on the left-hand end plate (1)
If necessary use additional fitting possibilities as
follows:
•
Fastening hole on the back of the right-hand
end plate with M10 thread ("blind hole" (3))
•
supporting angles for I/O modules (see fitting
instructions supplied with the angles)
The ISO valve terminal can be fitted as desired.
Use washers if necessary.
Use the M8 thread for lifting eye bolt (e.g. for
safe transport).
2
M8 thread in end plate
for lifting eye bolt
3
2-13