Diagnose Via; System Diagnosis; Error Treatment - Festo FB16 Electronic Manual

VIFB16 - 03/05
5.6 DIAGNOSE VIA FIELD BUS (ORPHEE)
5-20
5. Diagnosis/error treatment

System diagnosis

The functions of the system diagnosis for the
valve terminal connected to the FIPIO-bus are
shown in the dynamic display. It is possible:
•
to read the hardware configuration and to
compare it with the programmed configuration
in the controller;
•
to dynamically display the configuration in the
configuration editor.
The various procedures are described in the
appendix to the ORPHÉE documentation "ORP-
HÉE V6.2, ORPHÉE DIAG" (no. TEM10000/
10800F).
Detailed specifications about the status of a
configured valve terminal are shown in the
dynamic display of the configuration editor.
•
Activate the dynamic display of the FIPIO
configuration.
•
Open the device-specific analysis of the valve
terminal.
0506b