Entering The Valve Terminal - Festo FB16 Electronic Manual

VIFB16 - 03/05
Fig. 4/17: Mask for the field bus configuration
0506b
4. Commissioning

Entering the valve terminal

Valve terminals can be accessed in the STD_P
family of the configuration screen of the FIPIO-
bus. Always proceed as follows:
•
Activate the function "EQT STD" in the menu
PLC CONFIGURATION (FIPIO NETWORK)
in order to enter a valve terminal as device
family STD_P on the FIPIO.
•
Enter the number of the field bus address (1
to 62) in the menu which follows.
•
Select Device reference FSD_C8 fo the Fe-
sto valve terminal.
PLEASE NOTE
Make sure that the number of the field bus
address defined under ORPHEE agrees with
the field bus address of the valve terminal.
4-43