VIFB16 - 03/05
4.2.3 Programming under Xtel (V52)
0506b
4. Commissioning
Available objects
With the various objects which are directly
accessible in the control program, the user has
access to the inputs of the valve terminals and
sets the outputs of the valve terminals.
Access to these objects is only possible if
re-configuration is first carried out with the
software tool PL7-3. The following procedure
should therefore be followed (XTEL V52 examp-
le):
•
Start software tool PL7-3
•
Press V5 CONF button or press the function
key F4
Additional information is available in your softwa-
re manual.
4-31