Basic Rule 2 - Festo FB16 Electronic Manual

VIFB16 - 03/05
4-14
4. Commissioning

Basic rule 2

If only valves are used, the address assignment
is always as described in basic rule 1.
PLEASE NOTE
•
Maximum 26 solenoid valve coils
can be addressed.
•
There is no rounding up of the last two
positions on the valve side.
•
The status bits are available in the first byte
of the input (see chapter 5.4 "Status bits").
Basic rule 3
If only electrical I/Os are used, the address
assignment is always the same as in basic
rule 1.
PLEASE NOTE
•
Counting begins immediately to the left of
the node.
•
There is no rounding up of the last
two positions on the valve side.
0506b