Festo FB16 Electronic Manual page 31

VIFB16 - 03/05
2.1 FITTING THE COMPONENTS
0506b
2. Fitting
WARNING
Before fitting the components, switch off the
following:
•
compressed air supply
•
power supply to the outputs (pin 2)
•
power supply to the electronic
components (pin 1)
You can thereby avoid:
•
uncontrolled movements of loose hoses
•
undesired movement of the connected
actuators
•
undefined switching states of the electronic
components
CAUTION
The components of the valve terminal contain
elements which are liable to damage by
electrostatic charges.
•
Do not therefore touch any contact surfaces
on the side plug connectors of the compo-
nents.
•
Observe the instructions for handling
elements liable to damage by electrostatic
charges.
You thereby avoid destroying the valve terminal
components.
2-3