Commissioning Under; Software Version Required; Selecting The Controller And The Processor - Festo FB16 Electronic Manual

Valve terminal type 03/05, field bus connection

Table of Contents

VIFB16 - 03/05

4.3.2 Commissioning under ORPHEE (APRIL controllers)

4-42

4. Commissioning

The configuration editor of ORPHEE permits the

configuration and commissioning of the field bus

slaves on the FIPIO-bus. Configuration of the

Festo valve terminals with FB16 requires a

version of ORPHEE ≥ V6.2.

The following sections describe the procedure

which permits the use of Festo valve terminals

on the APRIL-5000 controlled FIPIO-bus. More

detailed information on connecting and configur-

ing the field bus slaves on the FIPIO-bus can be

found in the appendix on the ORPHÉE docu-

mentation: "ORPHEE V6.2 /ORPHEE-DIAG" no.

TEM10000/10800F.

PLEASE NOTE

The software packages are subject to modifi-

cations which may not be taken into conside-

ration in this manual. Further and more up-to-

date instructions can be found in the manual

for the relevant software package.

Valve terminals can only be implemented with

CPU5030 or CPU5130, version ≥ 2 (with integra-

ted FIPIO field bus module). The windows for the

field bus configuration are not accessible until

one of these processors has been selected.

0506b

Table of Contents

Chapters

Table of Contents