Parameterisation And Signal Display With The Handheld (Mmi) - Festo CPX-P-8DE-N Series Description

3. Input module CPX-P-8DE-N-...

3.3.10 Parameterisation and signal display with the handheld (MMI)

Type code Miniature
switch set-
ting
CPX-P-8DE-N OFF
CPX-P-8DE-N-IS
CPX-P-8DE-N ON
CPX-P-8DE-N-IS
1)
Standard process image (factory setting)
2)
Extended process image
Tab. 3/37: Module identifier on the MMI, module code and sub-module code
3-44
General information regarding operation of the handheld
and commissioning of the CPX terminal with the handheld can
be found in the description for handheld type P.BE.CPX-
MMI-1-... . Knowledge of the basic functions of the handheld
are assumed in the following section.
You can use the handheld to access all of the module data
and module parameters. The module identifier of a module is
shown in the handheld. The module identifier of the CPX-
P-8DE-N.. depends on the setting of the miniature switch on
the module.
Module identifier on the
handheld
Brief text
1)
P-8DI-N
P-8DI-N-IS
2)
P-8DI-N-X
P-8DI-N-IS-X
Module
code
Long text
Input NAMUR 32
Input NAMUR IS
Input NAMUR X 184
Input NAMUR IS X
Festo P.BE-CPX-P-EA-EN en 1209NH English
Sub-code
10
110
10
110