Table of Contents
Advertisement
Using Avaya CallPilot® system utilities
DS30X links
In the DS30X link pane, each DS30 row represents a separate DS30X link (also referred to
as a DS30 link). Each box in the row represents one DS30X channel.
The DS30X links connect the CallPilot server to the MGate card in the Meridian 1 switch or
Avaya Communication Server 1000 system. The DS30X link to the switch is supported by the
connection of the server to the switch backplane.
Important:
if your server has NTRH40AA cards, you must connect the DS30X-1cable to an MGate card
to receive the clock source for the MPB96 board. Failure to connect the DS30X-1 cable to
an MGate card can result in noise interference on the remaining voice channels.
This restriction does not apply to the NTRH40CA MPB96 boards.
System Info tab
Figure 9: System Info tab
66
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
on page 67 shows an example of the System Info tab.
December 2010
Advertisement
Table of Contents
