Table of Contents
Advertisement
DSPs
In the DSP pane, each DSP is represented in a separate row. Each box in the row is one DSP
channel or multimedia channel. Click the Legend/Help tab to view descriptions of the
multimedia channel icons.
For tower and rackmount CallPilot servers, DSPs reside in MPB96 and MPB16-4 boards and
MPC-8 cards. For 1002rp servers, DSPs are distributed as follows:
• MPB96 board has 12 DSP sections embedded on board
• One MPB16-4 board consists of two embedded DSPs and up to four MPC-8 cards.
• Each MPC-8 card contains a single DSP.
DS30X links
In the DS30X link pane, each DS30 row represents a separate DS30X link (also referred to
as a DS30 link). Each box in the row represents one DS30X channel.
The DS30X links connect the CallPilot server to the MGate card (NTRB18CA) in the Meridian 1
switch or Communication Server 1000* system.
For the 1002rp server, the DS30X link to the switch is supported by the connection of the server
to the switch backplane.
T1 Links
In the T1 link pane, each row represents a T1 link. Each box in the row represents one DS0
channel.
The T1 links connect the Callpilot Server to a Line Side T1 card on the SL100 or to a Channel
Bank on the DMS-100* switch.
System Info tab
Figure 7: System info tab
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
on page 72 shows an example of the System Info tab.
DSPs
December 2010
71
Advertisement
Table of Contents
