Table of Contents
Advertisement
Monitoring multimedia hardware
components down the left side of the screen. To list the server hardware components, click
the plus sign (+) at the top of the tree. To list the subcomponents for each component, click
the plus sign (+) beside the component.
Note:
The components that are listed on the Maintenance screen are based on the CallPilot server
type and the switch that is connected to CallPilot.
When you click a component, the screen refreshes to show the details about that component.
Details are divided into the sections described in the following table.
Table 12: Component sections
Section
General
Maintenance
Diagnostics
Maintenance activities for each component
The following table identifies the maintenance activities you can perform for each component
that is listed in the component tree.
48
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
This section shows general technical information about the selected
component. This typically includes the following details:
• the name, class, type, series, or version of a component
• various capabilities of a component (for example, whether a component
is removable)
Note:
This section does not appear for all components.
This section shows the state of the selected component. Use this section
to start and stop a component before running a diagnostic test.
For more information about working with component states, see the
following sections:
•
Viewing component states
•
Starting and stopping components
Use the Diagnostics section to run one or more diagnostic tests, or to
view the results of the last diagnostic tests that were run on the selected
component.
For more information about running diagnostics, see the following
sections:
•
Running integrated diagnostics
•
Viewing the last diagnostics result
Description
on page 49
on page 51
on page 54
on page 56
December 2010
Advertisement
Table of Contents
