Table of Contents
Advertisement
Nbtstat command syntax
The nbtstat command uses the following syntax:
nbtstat [-a remotename] [-A IP address] [-c] [-n] [-R] [-r] [-S] [-s]
[interval]
nbstat command parameters
Table 9: nbstat command parameters
Parameter
-a remotename
-A IP address
-c
-n
-R
-r
-S
-s
interval
To run the nbtstat command from Windows
1. Click Start > Programs > Accessories > Command Prompt.
2. Type nbtstat with the required parameters.
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
Lists the remote computer name table using its name.
Lists the remote computer name table using its IP address.
Lists the contents of the NetBIOS name cache giving the IP address
of each name.
Lists local NetBIOS names. Registered indicates that the name is
registered by broadcast (Bnode) or WINS (other node types).
Reloads the LMHOSTS file after purging all names from the
NetBIOS name cache.
Lists name resolution statistics for Windows networking name
resolution Windows computer configured to use WINS, this option
returns the number of names resolved and registered through
broadcast or through WINS.
Displays both client and server sessions, and lists the remote hosts
by IP address.
Displays both client and server sessions and attempts to convert the
remote host IP address to a name using the HOSTS file.
Displays selected statistics, pausing interval seconds between each
display. Press Ctrl+C to stop displaying statistics. Without this
parameter, nbtstat prints the current configuration information once.
Result: The Command Prompt dialog box appears.
Description
Nbtstat command syntax
December 2010
37
Advertisement
Table of Contents
