Table of Contents
Advertisement
Using Windows online diagnostic tools
The following flags are available for the ipconfig command.
Table 5: ipconfig command extensions
Flag
/?
/all
/release
/renew
To run the ipconfig command from Windows
1. Click Start > Programs > Accessories > Command Prompt.
2. Type ipconfig <parameters>.
3. Press Enter.
4. Type Exit to exit the Command Prompt dialog box and return to Windows.
The ping command
The ping command sends an echo request to a specified host. Use this command to verify
network connectivity to the remote device.
Ping command syntax
The ping command uses the following syntax:
ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL] [-v TOS] [-r count]
[-s count] [[-j host-list] | [-k host-list]] [-w timeout]
destination-list
Table 6: ping command extensions
Parameter
-t
32
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
Displays Help information.
Displays full configuration information.
Releases the IP address for the specified adapter.
Renews the IP address for the specified adapter.
Result: The Command Prompt dialog box appears.
Example: ipconfig /all
Result: The system runs the ipconfig utility.
Pings the specified host until interrupted.
Description
Description
December 2010
Advertisement
Table of Contents
