Table of Contents
Advertisement
RAID operations
Figure 35: PCI riser assembly rear grooves
17. Reconnect the PCI riser assembly power cord.
18. Reconnect the SCSI cable to the RAID card.
19. Replace the chassis cover.
20. Take the ESD strap off.
21. Power up the server and log on to Windows.
22. Click Next.
23. Select the presented driver.
24. Check that the RAID firmware is version 1L37. Refer to
25. Upgrade the RAID firmware, if required. Refer to
26. Configure the new RAID card. Refer to
27. Test the system to ensure the new board is functioning properly.
102
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
Result: The Windows New Hardware Found Wizard screen appears.
version
on page 90.
firmware
on page 91.
page 92.
For instructions, see "Testing the CallPilot installation" in the Installation and
Configuration Task List (NN44200-306).
To verify the RAID firmware
To upgrade or downgrade the RAID
To configure an LSI320-1 RAID system
on
December 2010
Advertisement
Table of Contents
