Table of Contents
Advertisement
Figure 24: PCI riser assembly rear grooves
16. Reconnect the PCI riser assembly power cord.
17. Reconnect the SCSI cable to the RAID card.
18. Reconnect all cables.
19. Replace the chassis cover.
20. Take the ESD strap off.
21. Power up the server and log onto Windows.
22. Click Next.
23. Select the presented driver (there is only one).
24. Run the Configuration Wizard to detect the new hardware.
25. Test the system to ensure the new board is functioning properly.
Replacing the DVD combo drive
The DVD combo drive is not hot-swappable. You must power down the system to replace the
DVD combo drive.
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
Result: The Windows New Hardware Found Wizard screen appears.
For instructions, see the Installation and Configuration Task List (NN44200-306).
Result: The board replacement is complete.
For instructions, see "Testing the CallPilot installation" in the Installation and
Configuration Task List (NN44200-306).
Replacing the DVD combo drive
December 2010
83
Advertisement
Table of Contents
