Table of Contents
Advertisement
target_name
To run the tracert command from Windows
1. Click Start > Programs > Accessories > Command Prompt.
2. Type the following command:
3. Press Enter.
4. Type Exit to exit the Command Prompt dialog box and return to Windows.
The arp command
The arp command displays and modifies the IP-to-physical address translation tables used by
Address Resolution Protocol (ARP).
ARP command syntax
The ARP command uses the following syntax:
arp -s inet_addr eth_addr [if_addr]
arp -d inet_addr [if_addr]
arp -a [inet_addr] [-N if_addr]
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
Parameter
Result: The Command Prompt dialog box appears.
tracert [-d] [-h maximum_hops] [-j host_list] [-w timeout]
[target_name]
Example: tracert 200.286.0.32
Result: The system runs the tracert utility.
Description
Specifies the name of the target host.
The arp command
December 2010
35
Advertisement
Table of Contents
