Viewing The Last Diagnostics Result - Avaya CallPilot 1005r Maintenance And Diagnostics

Monitoring multimedia hardware
8. Select the check box for each diagnostic that you want to run.
9. Click Run.

Viewing the last diagnostics result

You can review the results of diagnostics by clicking the Get Last Results button for a
component.
To view the last diagnostics result
1.
2. In CallPilot Manager, click Maintenance > Maintenance Admin.
3. Click the plus sign (+) beside the CallPilot server to expand the component tree.
4. Continue clicking the plus signs (+) until the component you want to work with is
5. Click the hardware component for which you want to run diagnostics with.
6. Scroll down to the Diagnostics section.
7. Select the check box for each diagnostic for which you want to review results.
8. Click Get Last Result.
56 Avaya CallPilot® 1005r Server Maintenance and Diagnostics
Note:
If you want to run all of the diagnostics, select the Diagnostic Description check
box at the top of the list.
Result: A new Web browser window appears with the progress and results of the
diagnostics.
Note:
The Diagnostic Results box in the Diagnostics section appears when you click
Get Last Result.
Important:
Avaya recommends that you courtesy stop rather than stop a component if
possible. For instructions, see
Run CallPilot Manager and log on.
Result: The Maintenance screen appears.
visible.
Result: The Maintenance screen refreshes to show details about the component.
Result: The results appear in the Diagnostic Results box with the following
information:
• diagnostic title
Starting and stopping components on page 51.
December 2010