Avaya CallPilot 1005r Maintenance And Diagnostics page 123

4. Enter 3 to select Utilities (BIOS, Firmware, etc...) and press Enter.
To upgrade the BIOS and system board firmware
1. Enter 1 to run 1005r server BIOS update from the Avaya CallPilot Image Menu.
2. Enter Y to confirm.
3. Enter any key.
4. Enter 3 to run Utilities (BIOS, Firmware, etc...) from the Startup Menu and press
5. Enter 2 to run 1005r server FRU/SDR firmware update from the Avaya CallPilot
6. Enter Y to confirm.
7. Enter any key.
8. Enter 3 to run Utilities (BIOS, Firmware, etc...) from the Startup Menu and press
9. Enter 3 to run 1005r server Board Management Controller (BMC) firmware update
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
2.Install CallPilot 5.0 1005r server image and exit to DOS (FACTORY ONLY)
3.Utilities (BIOS, Firmware, etc...)
Result: The Avaya CallPilot Image Menu displays.
1.1005r server BIOS update
2.1005r server FRU/SDR firmware update
3.1005r server Board Management Controller (BMC) firmware update
4.LSI320-1 RAID controller firmware update
5.1005r system Utilities and SEL Viewer
6.Goto DOS
Result: The system prompts you to confirm the BIOS update.
Result: The BIOS update progress appears with the following message:
System will now reboot.
Press any key to continue...
Result: The system reboots and the Startup Menu appears.
Enter. If the Startup Menu is not displayed, refer to
Image Menu on page 122.
Image Menu.
Result: The system prompts you to confirm the FRU/SDR update.
Result: The FRU/SDR update progress dialog box appears with the following
message:
System will now reboot.
Press any key to continue...
Result: The system reboots and the Startup Menu appears.
Enter. If the Startup Menu is not displayed, refer to
Image Menu on page 122.
from the Avaya CallPilot Image Menu.
Result: The system prompts you to confirm the BMC update.
Requirements for upgrading or reconfiguring the BIOS
To display the Avaya CallPilot
To display the Avaya CallPilot
December 2010 123