Verifying Consistency On The Drives - Avaya CallPilot 1005r Maintenance And Diagnostics

RAID operations
22. Press F10 and consecutively select YES to initialize the drive pack.
23. When the initialization is complete, press any key to return to the Management
24. Press ESC to exit the utility. Select Yes and press Enter.
25. Press Ctrl+Alt+Delete as indicated by the menu to reboot.

Verifying consistency on the drives

This optional consistency check on the logical drive of the RAID system ensures that the data
on the drives is identical. If any errors are found, they are corrected automatically. Avaya
strongly recommends that you do a consistency check before you split the RAID system pack. If
possible, perform the consistency check the day before the scheduled maintenance. A good
data backup on an offline drive is important if you need to revert to the CallPilot system from
an unsuccessful upgrade or update.
Note:
The consistency check can take up to 2 hours to complete and has no significant impact on
system performance.
To perform a consistency check
1. In Windows, click Start > Programs > Power Console Plus > Launch Client.
2. Ensure that Access Mode > Full Access is selected, and click OK.
3. In the Logical Devices section, right-click the logical drive, and then choose Check
4. Select Configuration > Exit to close the MegaRAID console.
5. Click OK.
94 Avaya CallPilot® 1005r Server Maintenance and Diagnostics
menu.
Result: The MegaRAID Power Console Plus Server Selection dialog box appears.
Result: The MegaRAID Power Console Plus dialog box appears displaying the
Logical View of the Physical Devices and the Logical Devices. The status bar at the
bottom of the window indicates that RAID channels are being scanned. When
scanning is done, the screen refreshes and the Physical and Logical Devices screen
appears.
Consistency from the shortcut menu.
Result: The Check Consistency status dialog box appears. You are informed when
the check is finished. If any errors are found, a window with an error message
appears.
Result: An end of session message appears.
December 2010