Intershelf Links Configuration File (Isl.fil); Routing Configuration File (Routing.fil); Outgoing Routing Configuration File (Ogrouting.fil); Incoming Ddi Configuration File (Icddi.fil) - Avaya CS7000 Administrator's Manual

Chapter 4: Configuring the Avaya Conference Management Server (CMS)

Intershelf links configuration file (Isl.fil)

This file sets the parameters for intershelf linking. The ISL personality module links the
switching matrix of one shelf to another. The system provides for the linking of 32 digital
channels between the central processing units (CPUs) on two different shelves. The linking is
accomplished with two cables for each intershelf link.
isl.fil is an older technology. isf.fil is used if the multichassis 3 (MC3) card is
implemented. In conferencing systems, which were released prior to the deployment of MC3,
isl.fil is used in place of isf.fil.

Routing configuration file (Routing.fil)

Routing.fil is the configuration map for calls coming into the system. The system routes
these calls by DDI or by PIN.

Outgoing routing configuration file (Ogrouting.fil)

Note:
For more information about the outgoing routing configuration file, see
Note:
outgoing routing

Incoming DDI configuration file (Icddi.fil)

The incoming routing file associates channels with digit strings (telephone numbers) so that
incoming calls are simulated. The incoming routing file is located here: c:\C2001\data\
icddi.fil
INCOMING DDI TABLE
PRI ADDRESS
1,4,2
1,4,3
END ROUTING
50
CS7000 System Administrator Guide for Release 9.4
on page 34.
DDI
"4973931"
"4973931"
Managing
January 2006