Advertising Subnets Assigned To Clients - H3C SR8800-F Configuration Manual

Figure 30 Network diagram
If the address pool is applied to a VPN instance, the VPN instance must exist.
To bind the gateways to the DHCP server's MAC address:
Step
1. Enter system view.
2. Enter DHCP address pool
view.
3. Bind the gateways to the
device's MAC address.

Advertising subnets assigned to clients

This feature enables the route management module to advertise subnets assigned to DHCP clients.
This feature achieves symmetric routing for traffic of the same host.
As shown in
The BRAS devices send accounting packets to the RADIUS server. To enable the BRAS devices to
collect correct accounting information for each RADIUS user, configure the DHCP server to
advertise subnets assigned to clients. The upstream and downstream traffic of a RADIUS user will
pass through the same BRAS device.
Figure 31 Network diagram
If the address pool is applied to a VPN instance, the VPN instance must exist.
To configure the subnet advertisement feature:
Figure 31, Router A and Router B act as both the DHCP server and the BRAS device.
Command
system-view
dhcp server ip-pool pool-name
gateway-list ip-address&<1-64>
export-route
117
Remarks
N/A
By default, no DHCP address
pool exists.
By default, gateways are not
bound to any MAC address.