Appendix C Radius Subattributes (Vendor Id 25506) - H3C SR8800-F Configuration Manual

No. Attribute
80 Message-Authenticator
81 Tunnel-Private-Group-ID
87 NAS-Port-Id

Appendix C RADIUS subattributes (vendor ID 25506)

Table 4 lists all RADIUS subattributes with a vendor ID of 25506. Support for these subattributes
depends on the device model.
Table 4 RADIUS subattributes (vendor ID 25506)
No. Subattribute
1 Input-Peak-Rate
2 Input-Average-Rate
3 Input-Basic-Rate
4 Output-Peak-Rate
5 Output-Average-Rate
6 Output-Basic-Rate
15 Remanent_Volume
17 ISP-ID
20 Command
25 Result_Code
26 Connect_ID
27 PortalURL
28 Ftp_Directory
29 Exec_Privilege
32 NAT-IP-Address
33 NAT-Start-Port
Description
Used for authentication and verification of authentication packets to
prevent spoofing Access-Requests. This attribute is present when EAP
authentication is used.
Group ID for a tunnel session. To assign VLANs, the NAS conveys
VLAN IDs by using this attribute.
String for describing the port of the NAS that is authenticating the user.
Description
Peak rate in the direction from the user to the NAS, in bps.
Average rate in the direction from the user to the NAS, in bps.
Basic rate in the direction from the user to the NAS, in bps.
Peak rate in the direction from the NAS to the user, in bps.
Average rate in the direction from the NAS to the user, in bps.
Basic rate in the direction from the NAS to the user, in bps.
Total amount of data available for the connection, in different units
for different server types.
ISP domain where the user obtains authorization information.
Operation for the session, used for session control. Possible
values include:
•
1—Trigger-Request.
•
2—Terminate-Request.
•
3—SetPolicy.
•
4—Result.
•
5—PortalClear.
Result of the Trigger-Request or SetPolicy operation, zero for
success and any other value for failure.
Index of the user connection.
PADM redirect URL assigned to PPPoE users.
FTP, SFTP, or SCP user working directory.
When the RADIUS client acts as the FTP, SFTP, or SCP server,
this attribute is used to set the working directory for an FTP,
SFTP, or SCP user on the RADIUS client.
EXEC user priority.
Public IP address assigned to the user when the source IP
address and port are translated.
Start port number of the port range assigned to the user when the
source IP address and port are translated.
85