Configuring Interface-Leased Users; Configuring Subnet-Leased Users - H3C SR8800-F Configuration Manual

Configuring interface-leased users

You can configure up to one IPv4 interface-leased user and one IPv6 interface-leased user on an
interface. When leased users are in Layer 2 access mode, all IP users who access the BRAS
through an IPoE interface are called subusers. Use the display or reset commands to view or delete
the subuser information. For more information about viewing and deleting subuser information, see
IPoE commands in User Access Command Reference.
Interface-leased subusers support the DHCP user, unclassified-IP user, and IPv6-ND-RS user.
To configure interface-leased users:
Step
1. Enter system view.
2. Enter interface view.
3. Configure
interface-leased
users.

Configuring subnet-leased users

You can configure multiple subnet-leased users on an interface. Different subnets must have the
same mask length. Each subnet can be bound to only one subnet-leased user. When leased users
are in Layer 2 access mode, all IP users who access the BRAS through an IPoE interface are called
subusers. Use the display or reset commands to view or delete the subuser information. For more
information about viewing and deleting subuser information, see IPoE commands in User Access
Command Reference.
Subnet-leased subusers support only the unclassified-IP user.
To configure subnet-leased users:
Step
1. Enter system view.
2. Enter interface view.
Command
system-view
interface interface-type
interface-number
•
Configure an IPv4 interface-leased
user:
ip subscriber interface-leased
username name password
{ ciphertext | plaintext } string
[ domain domain-name ]
•
Configure an IPv6 interface-leased
user:
ipv6 subscriber interface-leased
username name password
{ ciphertext | plaintext } string
[ domain domain-name ]
Command
system-view
interface interface-type
interface-number
405
Remarks
N/A
N/A
By default, no interface-leased
user is configured.
Remarks
N/A
N/A