Configuring The Format For Radius Attribute 87; Setting The Data Measurement Unit For The Remanent_Volume Attribute - H3C SR8800-F Configuration Manual

Configuring the format for RADIUS attribute 87

About the format for RADIUS attribute 87
RADIUS attribute 87 is the NAS-Port-Id attribute. This attribute has the following format types:
•
Vendor-specific format—The attribute format is defined by a vendor.
•
Custom format—The attribute format is user defined. You can define the fields to be included
in the attribute, the sequence of the fields, and the delimiters to separate the fields.
RADIUS servers of different types might have different requirements for the format of the
NAS-Port-Id attribute. Configure the format for the NAS-Port-Id attribute to meet the requirements of
the RADIUS servers.
Procedure
To configure the format for RADIUS attribute 87:
Step
1. Enter system view.
2. Enter RADIUS scheme view.
3. Configure the format for
RADIUS attribute 87.
Setting the data measurement unit for the
Remanent_Volume attribute
The Remanent_Volume attribute is H3C proprietary. The RADIUS server uses this attribute in
authentication or real-time accounting responses to notify the device of the current amount of data
available for online users.
Perform this task to set the data measurement unit for the Remanent_Volume attribute. Make sure
the configured measurement unit is the same as the user data measurement unit on the RADIUS
server.
To set the data measurement unit for the Remanent_Volume attribute:
Step
1. Enter system view.
2. Enter RADIUS scheme
view.
3. Set the data measurement
unit for the
Remanent_Volume
attribute.
Command
system-view
radius scheme
radius-scheme-name
attribute 87 format { custom
{ c-vid [ delimiter ] | interface-type
[ delimiter ] | port [ delimiter ] | s-vid
[ delimiter ] | slot [ delimiter ] |
string string [ delimiter ] | subslot
[ delimiter ] } * | vendor vendor-id }
Command
system-view
radius scheme
radius-scheme-name
attribute remanent-volume unit
{ byte | giga-byte | kilo-byte |
mega-byte }
36
Remarks
N/A
N/A
By default, no format is
configured for RADIUS attribute
87 and the device uses the
attribute format defined by each
access module.
Remarks
N/A
N/A
By default, the data measurement
unit is kilobyte.