Configuring Chap Authentication (Authenticator Name Is Not Configured) - H3C SR8800-F Configuration Manual

Step
3. Configure a username for
the CHAP peer.
4. Configure local or remote
AAA authentication.
Configuring CHAP authentication (authenticator name is not
configured)
To configure the authenticator:
Step
1. Enter system view.
2. Enter interface view.
3. Configure the authenticator to
authenticate the peer by using
CHAP.
4. Configure local or remote AAA
authentication.
To configure the peer:
Step
1. Enter system view.
2. Enter interface view.
Command
ppp chap user username
For local AAA authentication, the
username and password of the
authenticator must be configured
on the peer.
For remote AAA authentication,
the username and password of
the authenticator must be
configured on the remote AAA
server.
For more information about AAA
authentication, see "Configuring
AAA."
Command
system-view
interface interface-type
interface-number
ppp authentication-mode chap
[ domain { isp-name | default
enable isp-name } ]
For local AAA authentication, the
username and password of the
peer must be configured on the
authenticator.
For remote AAA authentication,
the username and password of
the peer must be configured on
the remote AAA server.
For more information about AAA
authentication, see
AAA."
Command
system-view
interface interface-type
interface-number
236
Remarks
The default setting is null.
The username you configure for the
peer here must be the same as the
local username you configure for the
peer on the authenticator.
The username configured for the
authenticator must be the same as
that configured on the authenticator.
The passwords configured for the
authenticator and peer must be the
same.
Remarks
N/A
N/A
By default, PPP authentication
is disabled.
The username configured for
the peer must be the same as
that configured on the peer.
The passwords configured for
the authenticator and peer must
be the same.
"Configuring
Remarks
N/A
N/A