Table of Contents
Advertisement
a. Select Access Service > Portal Service Management > Device from the navigation tree
to open the portal device configuration page.
b. Click Add to open the page as shown in
c. Enter the device name NAS.
d. Enter the IP address of the router's interface connected to the host.
e. Enter the key, which must be the same as that configured on the router.
f. Set whether to enable IP address reallocation.
This example uses direct portal authentication, and therefore select No from the Reallocate
IP list.
g. Set whether to support the portal server heartbeat and user heartbeat functions.
In this example, select No for both Support Server Heartbeat and Support User
Heartbeat.
h. Click OK.
Figure 102 Adding a portal device
4.
Associate the portal device with the IP address group:
a. As shown in
Figure
of device NAS to open the port group configuration page.
Figure 103 Device list
b. Click Add to open the page as shown in
Figure
103, click the icon in the Port Group Information Management column
Figure
332
102.
104.
Advertisement
Table of Contents
Troubleshooting
