Table of Contents
Advertisement
•
Use the LDAP server to authenticate SSH users.
•
Assign the default user role network-operator to SSH users after they pass authentication.
On the LDAP server, set the administrator password to admin!123456, add a user named aaa, and
set the user's password to ldap!123456.
Figure 17 Network diagram
Procedure
1.
Configure the LDAP server:
NOTE:
In this example, the LDAP server runs Microsoft Windows 2003 Server Active Directory.
# Add a user named aaa and set the password to ldap!123456:
a. On the LDAP server, select Start > Control Panel > Administrative Tools.
b. Double-click Active Directory Users and Computers.
The Active Directory Users and Computers window is displayed.
c. From the navigation tree, click Users under the ldap.com node.
d. Select Action > New > User from the menu to display the dialog box for adding a user.
e. Enter logon name aaa and click Next.
Figure 18 Adding user aaa
74
Advertisement
Table of Contents
Troubleshooting
