H3C SR8800-F Configuration Manual page 448

[PE1-radius-rs1] key authentication simple radius
[PE1-radius-rs1] key accounting simple radius
# Exclude the ISP name from the username sent to the RADIUS server.
[PE1-radius-rs1] user-name-format without-domain
[PE1-radius-rs1] quit
# Enable the RADIUS session-control feature.
[PE1] radius session-control enable
b. Configure the ISP domain:
# Create an ISP domain named dm1 and enter its view.
[PE1] domain dm1
# Configure ISP domain dm1 to use RADIUS scheme rs1.
[PE1-isp-dm1] authentication ipoe radius-scheme rs1
[PE1-isp-dm1] authorization ipoe radius-scheme rs1
[PE1-isp-dm1] accounting ipoe radius-scheme rs1
[PE1-isp-dm1] quit
c. Configure IPoE:
# Enable IPoE and configure Layer 3 access mode on GigabitEthernet 3/1/1.
[PE1] interface gigabitethernet 3/1/1
[PE1–GigabitEthernet3/1/1] ip subscriber routed enable
# Configure the L2VPN-leased user and specify the username, password, and ISP domain
for the user.
[PE1–GigabitEthernet3/1/1] ip subscriber l2vpn-leased username us1 password
plaintext pw1 domain dm1
[PE1–GigabitEthernet3/1/1] quit
Verifying the configuration
# Display IPoE session information to verify that the host has come online.
[PE1] display ip subscriber l2vpn-leased
Basic:
Access interface
VPN instance
Username
User ID
State
Service node
Domain
Login time
Online time (hh:mm:ss)
Total users
AAA:
ITA policyname
IP pool
Primary DNS server
Secondary DNS server
Session idle cut
Session duration
Traffic quota
: GE3/1/1
: N/A
: us1
: 0x30000000
: Online
: Slot 3 CPU 0
: dm1
: May 14 20:04:42 2014
: 00:16:37
: 0
: N/A
: N/A
: N/A
: N/A
: N/A
: N/A, remaining: N/A
: N/A
432