H3C SR8800-F Configuration Manual page 79

Step
3. Specify default accounting
methods for all types of
users.
4. Specify the command
accounting method.
5. Specify accounting
methods for IPoE users.
6. Specify accounting
methods for LAN users.
7. Specify accounting
methods for login users.
8. Specify accounting
methods for portal users.
Command
accounting default { hwtacacs-scheme
hwtacacs-scheme-name
[ radius-scheme radius-scheme-name ]
[ local ] [ none ] | local [ radius-scheme
radius-scheme-name |
hwtacacs-scheme
hwtacacs-scheme-name ] * [ none ] |
none | radius-scheme
radius-scheme-name
[ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ]
[ none ] }
accounting command
hwtacacs-scheme
hwtacacs-scheme-name
accounting ipoe { broadcast
radius-scheme radius-scheme-name1
radius-scheme radius-scheme-name2
[ local ] [ none ] | local [ radius-scheme
radius-scheme-name ] [ none ] | none |
radius-scheme radius-scheme-name
[ local ] [ none ] }
accounting lan-access { broadcast
radius-scheme radius-scheme-name1
radius-scheme radius-scheme-name2
[ local ] [ none ] | local [ radius-scheme
radius-scheme-name ] [ none ] | none |
radius-scheme radius-scheme-name
[ local ] [ none ] }
accounting login { hwtacacs-scheme
hwtacacs-scheme-name
[ radius-scheme radius-scheme-name ]
[ local ] [ none ] | local [ radius-scheme
radius-scheme-name |
hwtacacs-scheme
hwtacacs-scheme-name ] * [ none ] |
none | radius-scheme
radius-scheme-name
[ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ]
[ none ] }
accounting portal { broadcast
radius-scheme radius-scheme-name1
radius-scheme radius-scheme-name2
[ local ] [ none ] | local [ radius-scheme
radius-scheme-name ] [ none ] | none |
radius-scheme radius-scheme-name
[ local ] [ none ] }
63
Remarks
By default, the accounting
method is local.
By default, the default
accounting method is used
for command accounting.
By default, the default
accounting method is used
for IPoE users.
This command takes effect
only on CSPEX cards.
By default, the default
accounting method is used
for LAN users.
By default, the default
accounting method is used
for login users.
By default, the default
accounting method is used
for portal users.
This command takes effect
only on CSPEX cards.