H3C SR8800-F Configuration Manual page 410

Step
3. Configure
authentication user
naming conventions
for IPv4 dynamic
individual users.
Configuring authentication user naming conventions for IPv6 dynamic individual users
Step
1. Enter system view.
2. Enter interface view.
Command
•
Configure an authentication user
naming convention for DHCP
users:
ip subscriber dhcp username
include { circuit-id [ mac ]
[ separator separator ] | client-id
[ separator separator ] |
nas-port-id [ separator
separator ] | port [ separator
separator ] | remote-id
[ separator separator ] |
second-vlan [ separator
separator ] | slot [ separator
separator ] | source-mac
[ address-separator
address-separator ] [ separator
separator ] | string string
[ separator separator ] | subslot
[ separator separator ] |
sysname [ separator separator ]
| vendor-class [ separator
separator ] | separator
vendor-specific [ separator
separator ] | vlan [ separator
separator ] } *
•
Configure an authentication user
naming convention for
unclassified-IP users:
ip subscriber unclassified-ip
username include { nas-port-id
[ separator separator ] | port
[ separator separator ] |
second-vlan [ separator
separator ] | slot [ separator
separator ] | source-ip
[ address-separator
address-separator ] [ separator
separator ] | source-mac
[address- separator
address-separator ] [ separator
separator ] | string string
[ separator separator ] | subslot
[ separator separator ] |
sysname [ separator separator ]
| vlan [ separator separator ] } *
Command
system-view
interface interface-type
interface-number
394
Remarks
By default, usernames for DHCP
users are source MAC addresses,
and usernames for unclassified-IP
users are source IP addresses.
Remarks
N/A
N/A