Table of Contents
Advertisement
Step
4.
Configure the interface to
assign an IP address from the
configured DHCP address pool
to the peer.
5.
Configure an IP address for the
interface.
6.
(Optional.) Configure the
method of generating DHCP
client IDs when PPP users act
as DHCP clients.
Associating a PPP address pool with an ISP domain
Step
1.
Enter system view.
2.
Configure a PPP address pool.
3.
(Optional.) Enable new IP
address allocation.
4.
(Optional.) Configure a
gateway address for the PPP
address pool.
5.
(Optional.) Configure a PPP
address pool route.
6.
Enter ISP domain view.
7.
Associate the ISP domain with
the configured PPP address
pool for address assignment.
8.
Return to system view.
9.
Enter interface view.
10. Configure an IP address for the
interface.
Associating a DHCP address pool with an ISP domain
Step
1.
Enter system view.
Command
remote address pool pool-name
ip address ip-address
remote address dhcp
client-identifier { { callingnum |
username } [ session-info ] |
session-info }
Command
system-view
ip pool pool-name
start-ip-address [ end-ip-address ]
[ group group-name ]
ip pool pool-name
allocate-new-ip enable
ip pool pool-name gateway
ip-address [ vpn-instance
vpn-instance-name ]
ppp ip-pool route ip-address
{ mask-length | mask }
[ vpn-instance
vpn-instance-name ]
domain isp-name
authorization-attribute ip-pool
pool-name
quit
interface interface-type
interface-number
ip address ip-address
Command
system-view
242
Remarks
By default, an interface does not
assign an IP address to the
peer.
By default, no IP address is
configured on an interface.
By default, the method of
generating DHCP client IDs
when PPP users act as DHCP
clients is not configured.
When DHCP client IDs are
generated based on PPP
usernames, make sure different
users use different PPP
usernames to come online.
Remarks
N/A
By default, no PPP address
pool is configured.
By default, new IP address
allocation is disabled.
By default, the PPP address
pool is not configured with a
gateway address.
By default, no PPP address
pool route exists.
The destination network of the
PPP address pool route must
include the PPP address pool.
N/A
By default, no PPP address
pool is associated.
For more information about this
command, see AAA commands
in User Access Command
Reference.
N/A
N/A
By default, no IP address is
configured on an interface.
Remarks
N/A
Advertisement
Table of Contents
Troubleshooting
