H3C SR8800-F Configuration Manual page 394

a. Select User Access Policy > Access Service from the navigation tree to open the access
service page.
b. Click Add to open the page as shown in
c. Enter the service name.
d. Select the Transparent Authentication on Portal Endpoints option.
e. Use the default settings for other parameters.
f. Click OK.
Figure 137 Adding an access service
3. Add an access user:
a. Select Access User > All Access Users from the navigation tree to open the access user
page.
b. Click Add to open the page as shown in
c. Select an access user.
d. Set the password.
e. Select a value from the Max. Transparent Portal Bindings list.
f. Click OK.
Figure 138 Adding an access user
4. Configure system parameters:
a. Select User Access Policy > Service Parameters > System Settings from the navigation
tree to open the system settings page.
b. Click the Configure icon
in Figure 139.
c. Select whether to enable transparent portal authentication on non-smart devices.
In this example, select Enable for Non-Terminal Authentication.
Figure 137.
Figure 138.
for User Endpoint Settings to open the page as shown
378