Configuring Service-Specific Isp Domains - H3C SR8800-F Configuration Manual

Step
2. Enter interface view.
3. Configure ISP
domains for leased
users.

Configuring service-specific ISP domains

This task enables you to assign ISP domains to users based on services. You can classify services
by VLAN ID, 802.1P, and DSCP carried in packets from users.
You must specify an identifier for a service before you bind an ISP domain to the service. Otherwise,
the binding does not take effect.
Configuring service-specific ISP domains for IPv4 users
Step
1. Enter system view.
2. Enter interface view.
3. Configure a service
identifier.
4. Configure
service-specific ISP
domains for IPv4
users.
Configuring service-specific ISP domains for IPv6 users
Step
1. Enter system view.
2. Enter interface view.
Command
interface interface-type
interface-number
•
Configure a domain collectively
for IPv4 leased users:
ip subscriber unclassified-ip
domain domain-name
•
Configure a domain collectively
for IPv6 leased users:
ipv6 subscriber unclassified-ip
domain domain-name
Command
system-view
interface interface-type
interface-number
ip subscriber service-identify
{ 8021p { second-vlan | vlan } | dscp |
second-vlan | vlan }
•
Bind an ISP domain to a VLAN
list:
ip subscriber vlan vlan-list
domain domain-name
•
Bind an ISP domain to an 802.1p
list:
ip subscriber 8021p 8021p-list
domain domain-name
•
Bind an ISP domain to a DSCP
list:
ip subscriber dscp
dscp-value-list domain
domain-name
Command
system-view
interface interface-type
interface-number
407
Remarks
N/A
By default, leased users use the
default system ISP domain.
Remarks
N/A
N/A
By default, no service identifier is
configured for DHCPv4 users, IPv4
unclassified-IP users, static
individual users, and leased users.
Only subinterfaces support
parameters 8021p, second-vlan
and vlan.
By default, no service-specific ISP
domains are configured DHCPv4
users, IPv4 unclassified-IP users,
static individual users, and leased
users.
For DHCPv4 users, the trusted
Option 60 configuration takes
precedence over the service
identifier configuration.
Only subinterfaces support
commands ip subscriber vlan and
ip subscriber 8021p.
Remarks
N/A
N/A