Table of Contents
Advertisement
Figure 133 Adding a portal device
4.
Associate the portal device with the IP address group:
a. As shown in
Figure
NAS to open the port group configuration page.
b. Click Add to open the page as shown in
c. Enter the port group name.
d. Select the configured IP address group.
The IP address used by the user to access the network must be within this IP address
group.
e. Select Supported for Transparent Authentication.
f. Use the default settings for other parameters.
g. Click OK.
Figure 134 Device list
134, click the Port Group Information Management icon for device
Figure
376
135.
Advertisement
Table of Contents
Troubleshooting
