H3C SR8800-F Configuration Manual page 373

•
Disable portal authentication when the authentication server is unreachable.
•
Synchronize portal user information with the portal server periodically.
Figure 115 Network diagram
Host
2.2.2.2/24
Gateway: 2.2.2.1/24
Configuration prerequisites and guidelines
•
Configure IP addresses for the router and servers as shown in
host, router, and servers can reach each other.
•
Configure the RADIUS server correctly to provide authentication and accounting functions.
Configuring the portal authentication server on IMC PLAT 3.20
In this example, the portal server runs on IMC PLAT 3.20-R2602P13 and IMC UAM 3.60-E6301.
1. Configure the portal authentication server:
a. Log in to IMC and click the Service tab.
b. Select Access Service > Portal Service Management > Server from the navigation tree
to open the portal server configuration page, as shown in
c. Configure the portal server heartbeat interval and user heartbeat interval.
d. Use the default settings for other parameters.
e. Click OK.
Figure 116 Portal authentication server configuration
2. Configure the IP address group:
a. Select Access Service > Portal Service Management > IP Group from the navigation
tree to open the portal IP address group configuration page.
b. Click Add to open the page as shown in
c. Enter the IP group name.
GE1/0/1
GE1/0/2
192.168.0.100/24
2.2.2.1/24
Router
Portal server
192.168.0.111/24
RADIUS server
192.168.0.112/24
Figure 117.
357
Figure 115 and make sure the
Figure 116.