Table of Contents
Advertisement
Step
5.
Configure the interval
at which the device
sends online requests
to static IPoE users.
Configuring global static IPoE sessions
A maximum of one static IPoE session can be configured for one IP address. Per-interface static
IPoE sessions take precedence over global static IPoE sessions.
To configure a global static IPoE session:
Step
1.
Enter system view.
2.
Configure a global
static IPoE session.
3.
Configure the interval
at which the device
sends online requests
to static IPoE users.
Configuring authentication user naming conventions for static
individual users
Usernames configured for static individual users must be the same as those configured on the AAA
server.
To configure authentication user naming conventions for static individual users:
Command
•
For IPv4 static IPoE session:
ip subscriber static-session
request-online interval seconds
•
For IPv6 static IPoE sessions:
ipv6 subscriber static-session
request-online interval seconds
Command
system-view
•
Configure a global static IPv4 IPoE
session:
ip subscriber session static ip
start-ip-address [ end-ip-address ]
[ mac mac-address ] [ domain
domain-name ] [ password mac ]
[ interface interface-type
interface-number [ vlan vlan-id
[ second-vlan vlan-id ] ]
[ request-online] ]
•
Configure a global static IPv6 IPoE
session:
ipv6 subscriber session static
ipv6 start-ipv6-address
[ end-ipv6-address ] [ mac
mac-address ] [ domain
domain-name ] [ password mac ]
[ interface interface-type
interface-number [ vlan vlan-id
[ second-vlan vlan-id ] ]
[ request-online ] ]
•
For IPv4 static IPoE session:
ip subscriber static-session
request-online interval seconds
•
For IPv6 static IPoE sessions:
ipv6 subscriber static-session
request-online interval seconds
402
Remarks
By default, the interval is 180
seconds.
Remarks
N/A
By default, no global static IPoE
session is configured.
Only subinterfaces support
parameters vlan and
second-vlan.
By default, the interval is 180
seconds.
Advertisement
Table of Contents
Troubleshooting
